MR-J2S-10B

1. FUNCTIONS AND CONFIGURATION

1.1 Introduction

The Mitsubishi MELSERVO-J2-Super series general-purpose AC servo is based on the MELSERVO-J2

series and has further higher performance and higher functions.

It is connected with a servo system controller or similar device via a serial bus (SSCNET) and the servo

amplifier reads position data directly to perform operation.

Data from a command unit controls the speed and rotation direction of the servo motor and executes

precision positioning.

A torque limit is imposed on the servo amplifier by the clamp circuit to protect the power transistor in the

main circuit from overcurrent due to sudden acceleration/deceleration or overload. The torque limit value

can be changed to any value with an external analog input or the parameter.

As this new series has the RS-232C serial communication function, a MR Configurator (servo

configuration software)-installed personal computer or the like can be used to perform parameter setting,

test operation, status display monitoring, gain adjustment, etc.

With real-time auto tuning, you can automatically adjust the servo gains according to the machine.

The MELSERVO-J2-Super series servo motor is equipped with an absolute position encoder which has

the resolution of 131072 pulses/rev to ensure more accurate control as compared to the MELSERVO-J2

series. Simply adding a battery to the servo amplifier makes up an absolute position detection system.

This makes home position return unnecessary at power-on or alarm occurrence by setting a home position

once.

   由于客户采购批量与样品的价格不同，网上无法统一注明，请您把采购型号通过邮件或客服QQ：2850151585 发给我们，也可以拨打明佳达国内销售部电话：0755-83957301，由客服人员为您报价；有时元件厂商价格稍许变动，本公司未能及时调整，如您觉得售价稍高，请与我们说明并适当议价，感谢支持!