TSA5522

TSA5522 - 1.4 GHz I2C-bus controlled synthesizer

FEATURES

• Complete 1.4 GHz single chip system

• Three PNP band switch buffers (20 mA)

• Four bus-controlled bidirectional ports (NPN

open-collector outputs); only one port in 16-pin version

• 33 V tuning voltage output

• In-lock detector

• 5-step ADC

• Mixer-Oscillator (M/O) band switch output

• 15-bit programmable divider

• Programmable reference divider ratio (512, 640

or 1024)

• Programmable charge-pump current (50 or 250 µA)

• Varicap drive disable

• I

2C-bus format

– address plus 4 data bytes transmission (write mode)

– address plus 1 status byte transmission (read mode)

– three independent addresses

• Low power and low radiation.

GENERAL DESCRIPTION (see Fig.1)

The device is a single chip PLL frequency synthesizer

designed for TV and VCR tuning systems. The circuit

consists of a divide-by-eight prescaler with its own

preamplifier, a 15-bit programmable divider, a crystal

oscillator and its programmable reference divider and a

phase/frequency detector combined with a charge-pump

which drives the tuning amplifier, including 33 V output.

Three high-current PNP band switch buffers are provided

for band switching together with four open-collector NPN

outputs (only one open-collector output on 16-pin

devices). These ports can also be used as input ports [one

Analog-to Digital Converter (ADC) and three general

purpose I/O ports (not available on 16-pin devices)]. An

output is provided to control a Philips mixer/oscillator IC in

combination with the PNP buffers state.

Depending on the reference divider ratio (512, 640

or 1024), the phase comparator operates at 3.90625 kHz,

6.25 kHz or 7.8125 kHz with a 4 MHz crystal. The LOCK

detector bit FL is set to logic 1 when the loop is locked and

is read on the SDA line (status byte) during a read

operation.

The ADC is available for digital AFC control. The ADC

code is read during a read operation on the I2C-bus. The

ADC input is combined with the port P6. In the TEST

mode, this port is also used as a TEST output for fref and

1⁄

2fdiv (see Table 4).

I

2C-bus format

Five serial bytes (including address byte) are required to

address the device, select the VCO frequency, program

the ports, set the charge-pump current and the reference

divider ratio. The device has three independent I2C-bus

addresses selected by applying a specific voltage on AS

input (see Table 3). The general address C2 is always

valid.

由于客户采购批量与样品的价格不同，网上无法统一注明，请您把采购型号通过邮件或客服QQ：2850151585 发给我们，也可以拨打明佳达国内销售部电话：0755-83957301，由客服人员为您报价；有时元件厂商价格稍许变动，本公司未能及时调整，如您觉得售价稍高，请与我们说明并适当议价，感谢支持!

MJD is a corporation which engaged in agency electronic components. MJD Through seventeen years unrimitting efforts,  aspire to provide our customers with world-leading products and service. Now already became a one of the most famous electronic components distributor in China.

---------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------

PAYMENTS:

We support the following payment methods:

1. Paypal

2. Western Union 

3. Bank Wire (TT)

4. MoneyGram

Shipping:

1. MJD needs about 3 BUSINESS DAY to handle the order after received payment. after receiving your payment. Otherwise, we will state it in the invoice in advance.

2. MJD can Ship via your shipping account (DHL / FEDEX / UPS / TNT or others) as your instruction. Or Ship via our shipping account (We have a very good relationship with DHL and FEDEX with very special freight).

3. Regarding the declared value on the package for customs clearance, we are pleased to follow your wishes, just feel free to inform us when ordering.

4. Any import fees or charges are the buyer's responsibility.

REFUNDS & RETURN:

We offer a warranty on all items that we sold. Item will be tested before ship,it will be in good condition,if there are some problems with the item,feel free to contact us.Please Email us to notify a defective item. Unless otherwise specified, this item comes with 30 days warranty from the shipment date.

You must contact us before returning any product. All returns must be made within 30 days from this shipment date.Return must be in new condition(the SAME CONDITION as it was sent to you)

Because of wholesale price is different from sample price, our website can not state. Please send your required part number via email Sales@hkmjd.com or skype id mjdccm898 to us.  As well as welcome you call us : 0755-83957301  We will send offer for you; Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support ！