CY7C4245V-15ASXC

CY7C4245V-15ASXC  - 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs

Functional Description

The CY7C42X5V are high-speed, low-power, first-in first-out

(FIFO) memories with clocked read and write interfaces. All

are 18 bits wide. The CY7C42X5V can be cascaded to

increase FIFO depth. Programmable features include Almost

Full/Almost Empty flags. These FIFOs provide solutions for a

wide variety of data buffering needs, including high-speed data

acquisition, multiprocessor interfaces, and communications

buffering.

These FIFOs have 18-bit input and output ports that are

controlled by separate clock and enable signals. The input port

is controlled by a Free-Running Clock (WCLK) and a Write

Enable pin (WEN).

When WEN is asserted, data is written into the FIFO on the

rising edge of the WCLK signal. While WEN is held active, data

is continually written into the FIFO on each cycle. The output

port is controlled in a similar manner by a Free-Running Read

Clock (RCLK) and a Read Enable pin (REN). In addition, the

CY7C42X5V have an Output Enable pin (OE). The read and

write clocks may be tied together for single-clock operation or

the two clocks may be run independently for asynchronous

read/write applications. Clock frequencies up to 66 MHz are

achievable.

Retransmit and Synchronous Almost Full/Almost Empty flag

features are available on these devices. 

Depth expansion is possible using the Cascade Input (WXI,

RXI), Cascade Output (WXO, RXO), and First Load (FL) pins.

The WXO and RXO pins are connected to the WXI and RXI

pins of the next device, and the WXO and RXO pins of the last

device should be connected to the WXI and RXI pins of the

first device. The FL pin of the first device is tied to VSS and the

FL pin of all the remaining devices should be tied to VCC. 

The CY7C42X5V provides five status pins. These pins are

decoded to determine one of five states: Empty, Almost Empty,

Half Full, Almost Full, and Full (see Table 2). The Half Full flag

shares the WXO pin. This flag is valid in the stand-alone and

width-expansion configurations. In the depth expansion, this

pin provides the expansion out (WXO) information that is used

to signal the next FIFO when it will be activated.

The Empty and Full flags are synchronous, i.e., they change

state relative to either the Read Clock (RCLK) or the write

clock (WCLK). When entering or exiting the Empty states, the

flag is updated exclusively by the RCLK. The flag denoting Full

states is updated exclusively by WCLK. The synchronous flag

architecture guarantees that the flags will remain valid from

one clock cycle to the next. As mentioned previously, the

Almost Empty/Almost Full flags become synchronous if the

VCC/SMODE is tied to VSS. All configurations are fabricated

using an advanced 0.65µ P-Well CMOS technology. Input

ESD protection is greater than 2001V, and latch-up is

prevented by the use of guard rings. 

由于客户采购批量与样品的价格不同，网上无法统一注明，请您把采购型号通过邮件或客服QQ：2850151585 发给我们，也可以拨打明佳达国内销售部电话：0755-83957301，由客服人员为您报价；有时元件厂商价格稍许变动，本公司未能及时调整，如您觉得售价稍高，请与我们说明并适当议价，感谢支持!

MJD is a corporation which engaged in agency electronic components. MJD Through seventeen years unrimitting efforts,  aspire to provide our customers with world-leading products and service. Now already became a one of the most famous electronic components distributor in China.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 PAYMENTS:

We support the following payment methods:

 1. Paypal

 2. Western Union 

 3. Bank Wire (TT)

 4. MoneyGram

Shipping:

1. MJD needs about 3 BUSINESS DAY to handle the order after received payment. after receiving your payment. Otherwise, we will state it in the invoice in advance.

2. MJD can Ship via your shipping account (DHL / FEDEX / UPS / TNT or others) as your instruction. Or Ship via our shipping account (We have a very good relationship with DHL and FEDEX with very special freight).

3. Regarding the declared value on the package for customs clearance, we are pleased to follow

your wishes, just feel free to inform us when ordering.

4. Any import fees or charges are the buyer's responsibility.

REFUNDS & RETURN:

We offer a warranty on all items that we sold. Item will be tested before ship,it will be in good condition,if there are some problems with the item,feel free to contact us.Please Email us to notify a defective item. Unless otherwise specified, this item comes with 30 days warranty from the shipment date.

You must contact us before returning any product. All returns must be made within 30 days from this shipment date.Return must be in new condition(the SAME CONDITION as it was sent to you)

Because of wholesale price is different from sample price, our website can not state. Please send your required part number via email Sales@hkmjd.com or skype id mjdccm898 to us.  As well as welcome you call us : 0755-83957301  We will send offer for you;  Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support ！